Parex Maite - 25kg

Parex Maite is a highly flexible multi-purpose coloured, breathable and weatherproof mortar in powder form ready to mix with water. It can be used for a range of applications but is intended to be used in the Parextherm and Parexdirect render systems. \n

Suitable Substrate

Suitable for: 

• PAREXTHERM external wall insulation systems
• PAREXDIRECT render systems
• PAREX® brick slip systems
• Approved insulations of expanded polystyrene, mineral wool and applications conforming to Technical Approvals.
• Insulated concrete formwork systems (ICF)1
• Old EWI systems with thin coatings in need of renovation.
• PAREX® approved render boards2
• Cast in-situ concrete - prepare with MICRO GOBETIS 3000
• Lightweight aircrete blockwork - prepare with MICRO GOBETIS 3000.
• Concrete blockwork.
• Durisol interlocking modular blocks. Brickwork and stonework - May require the use of MICRO GOBETIS 3000 or 751 LANKOLATEX.
• For bonding the PAREX® PROFILES to masonry or render substrates.
• As a base coat for the coating of phenolic, XPS and EPS foam shapes and decorative profiles.
• As an adhesive and base coat for other insulations, e.g. cork, wood fibre etc. Check with Parex Technical Department.
  

CF is generally made from moulded / extruded EPS which has a shiny surface finish not suitable for receiving a render finish. Before applying the render, make sure the ICF receives a light sanding to create a roughened bonding surface. \n2 All Parex approved boards have an A1 fire rating. In addition, due to potential mould growth issues and possible associated health concerns Parex do not recommend for external applications the use of cement particle boards, boards that have wood particles or boards containing any form of wood fibre. These types of board are also prone to dimensional instability making them unsuitable for render applications. Consult PAREX® for a range of suitable render boards. \n

Usage

• Adhering the insulation for Parextherm EWI systems
• Creating a base coat with the 355 AVU mesh.
• Creating decorative coloured finishes by hand or spray machine.
• Using as a dash receiver with the MARBRI dash aggregates.
• Adhering PAREX^® profiles.
  

Coverage

These values are provided as guidance only and may vary subject to substrate conditions, thickness applied and system installed. \n

• As an insulation adhesive - 2.6 kg/m2 (7.1- 9.6 m2 ▪ per 25 kg bag)
• For making the base coat with mesh - 4.5 kg/m2 (2.9 - 5.5 m2 per 25 kg bag)
• For making a top coat finish - 2.6 kg/m2 (7.1- 9.6 m2 ▪ per 25 kg bag)
  

PLEASE NOTE: on uneven substrates the consumption rate may significantly increase to gain a level and lined surface. \n

Properties

High Water Resistance,  Excellent Adhesion Properties, Suitable for Hand or Spray Application. \nWater Demand : Approx. 4.2 Ltrs per 25 kg bag \nReaction to fire - Can achieve A2 when used as part of Parextherm or Parexdirect systems. \nApplication Temperature - Dry frost free conditions 

Packaging

Parex Maite is supplied in 25kg bags.

Technical & Safety Datasheets

Please follow link to Parex Maite technical datasheet. \nPlease follow link to Parex Maite safety datasheet.

Delivery

Parex Maite is usually available for premium delivery.