Parex Parmurex - 25kg

Parmurex is a one-coat weather resistant grey render for internal and external walls.  Suitable as a grey coat finishing render or as a base coat for receiving a decorative finish. e.g. MONOREX GM & GF, MONOBLANCO, & REVLANE. \n

Suitable Substrate

\nMasonry and walls conforming to BS 5628-3 and constructed from the following: \n

\n
• Dense aggregate concrete blocks.
\n
• Dense bricks.
\n
• Breeze blocks (clinker).
\n
• Stone/rubble stone.
\n
• Shuttered concrete.
\n
• Clean, sound, well adhered existing render.
\n
• Base coats conforming to BS EN 13914-1
\n
• Below dpc applications and old substrates in accordance with BS8000 - 4 Code of Practice for Waterproofing - consult Sika for guidance.
\n

\nUnsuitable Substrate \n

\n
• High-suction, weak or old substrates, Ultra-lightweight & lightweight aggregate concrete blocks, clay blocks, standard low and normal density lightweight aircrete blocks.
\n
• Dry stacked inter-locking modular wall units e.g. Durisol, Velox etc .
\n
• Weak mortar or plaster coated constructions.  Exposed vertical substrates with a backward incline above 10 ° - a backward incline may affect water run off and may have a tendency to hold moisture.
\n

\n

Substrate Primer

\n

\n
• Shuttered concrete and other nonabsorbent substrates, first apply a coat of ready-to use MICRO GOBETIS 3000 or a key-coat made up by adding 0.5 L of 751 LANKOLATEX to the mixing water volume for 25 kg of PARMUREX.
\n
• On wet or wet patchy substrates or where different materials have been used it is advisable to apply a key coat made up by exchanging 0.5 litres of water for 0.5L of 751 LANKOLATEX or FIXOPIERRE for the mixing volume for a 25kg bag of PARMUREX. Allow the key coat to fully dry a minimum of 48 hours before the application of the next coat. This suggestion will assist against the effect of ‘block ghosting’ and shade variation. TV10 MESH may also be required, dependent up
\n

\n

Coverage

\nApprox. 1.7kg per mm / per m2 \n

\n
• Approx. 1.25-1.3 m² @ 15mm/25 kg bag floated smooth - Applied on Block & Brick
\n
• Approx. 1.66-1.75 m² @ 10mm/25 kg bag floated smooth for decorative finish - Applied on base coat renders or concrete
\n

\n

Properties

\nSuitable for strong dense substrates , Water Resistant in one coat, Excellent for float smoothing, Breathable,  Suitable for Hand or Spray Application. \nWater Demand : Approx. 3.8-4.3 Ltrs per 25 kg bag \nWater Absorption - W2 \nReaction to fire - A1 \nApplication Temperature - Dry frost free conditions \n

Packaging

\nSika Parmurex is supplied in 25kg bags. \n

Technical & Safety Datasheets

\nPlease follow link to Sika Parmurex technical datasheet. \nThe link to Sika Parmurex safety datasheet is not available. \n

Delivery

\n